Premium Build Quality

Rock solid HDF cabinets

Higher density and naturally better damped than MDF (Medium Density Fiberboard), using HDF (High Density Fiberboard) results in a sonically inert cabinet. HDF was also chosen because it can be machined much more precisely than MDF, which is especially important for precision critical areas like the two part HDF & Aluminum waveguide.

Arendal Sound products are using HDF thicknesses ranging from 18 to 50mm throughout the designs, with critical areas like driver mounting and cabinet bases being the thickest.

Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that may cause audible colorations. Internal braces are CNC routed to shape to smooth internal airflow and minimize volume losses within the cabinet, whilst maintaining thickness at critical assembly joints.

The final detail is to apply a butyl based differential mass damping layer to the inner faces of the cabinet, just to be sure we have damped out every last resonance.


Magnetic metal grills

We are especially proud of our new exclusive and fully custom made grills. For all Arendal Sound speakers we have made a free flowing, perforated metal grill which does not affect sound quality. We have then wrapped it with a clean black cloth to tone down the visually hard look, whilst simultaneously damping out any residual vibrations.

In addition, we did not want plastic pins to add the grill, which will degrade the clean look of the cabinet with pin cups. Neodymium sub-surface magnets grip the metal grill with great force, preventing unwanted movement and vibration during high level playback. The grills have a rubber protection to ensure the cabinet is not damaged when you attach the grill and you will hear a nice ‘thump’ when you let them seat. Grilles on or off, our speakers look and sound great either way.

Premium finishes

All Arendal Sound speakers comes in four premium finishes;

  • Black Matte
  • Black Gloss
  • White Matte
  • White Gloss

To ensure the best and long lasting quality, all Arendal Sound speakers use up to 12 layers of paint, consisting of primers and polyurethane paint, hand finished. We use no vinyl, anywhere.

The finish is what you would expect from Hi-End products.

No plastic - "Green sound"

Well, you may find a cable strap somewhere in plastic, but all components in Arendal Sound which affects the sound are built up from non-plastic parts. High grade aluminium back plates on subwoofers and speakers. Even our logo is in anodized aluminium.


Internal wiring

Not your average zip cord. All products utilize high count multi-strand wire, braided together.  These were not done for looks, but chosen to produce the most consistent impedance possible and electrical current carrying capabilities. The benefit is very low insertion losses without the problems of “skin effect” caused by large diameter wires. This insures that each driver sees what the amplifier intended without additional colorations.

Rubber feet

All subwoofers comes with rigid rubber feet (M6 threads) which have a strong grip on the floor. You will not have a subwoofer walking around, even if that is impossible due to the sheer mass of our HDF cabinets which are "super quiet". Put your hand on our speakers whilst they are playing and you will feel, very, very little.

1723 Series Comparison Subwoofers
Finish
Woofer 13.8"
13.8"
2 x 13.8" 2 x 13.8"
Enclosure High Density Fiberboard (HDF)
High Density Fiberboard (HDF)
High Density Fiberboard (HDF) High Density Fiberboard (HDF)
Amplifier Avalanche 500DSP - 500W RMS
Avalanche 500DSP - 500W RMS
Avalanche 1000DSP - 1000W RMS
Avalanche 1000DSP - 1000W RMS
Design Sealed
Sealed / vented
Sealed Sealed / vented
Size
49.2H x 33.5W x 45D cm
63.7H x 45W x 55D cm 54.2H x 42W x 50D cm 71.2H x 50W x 60.9D cm
Weight 24.5 kg 48.1 kg 41.4 kg 60.1 kg