Featuring the same uncompromising approach we used to create the 1723 Tower, the 1723 Monitor was developed for smaller spaces and provide the perfect sonic partner to the matching 1723 Center. The 1723 Monitor features a completely custom built 2-way lineup of mid-bass drivers and a waveguide tweeter you cannot find anywhere else.
|Woofer||2 x 8"|
|Enclosure||Sealed / Vented|
|Enclosure material||High Density Fiberboard (HDF)|
|Freq. response (see chart here)|
|2 vents||34-20kHz (+/-3dB)|
|Ports||2 x 2"|
|Included||Manual. Rubber pads. Port plugs.|
|Dimensions||63.5H x 27.5W x 40D cm|
|Break-in for optimal performance||50 hours|
|Recommended amplifier||Up to 300W RMS @ 4ohm|
|Manual||Read our handbook here.|
All our 1723 speakers are Certified by the very strict testing protocols of THX Ultra where each speaker must pass a set of 400 measurements. The THX Certification does not mean it is a dedicated homer speaker, but rather a guarantee of tight consistency within well-established acoustic parameters. THX Certification is as much about music, as for movies.
The engineers at THX Labs utilize a proprietary scientific testing methodology to ensure the highest audio fidelity possible. All 1723 speakers passed the THX Ultra Certification without any change to the products, meaning our standards already exceed THX Ultra level out of the box!
From the beginning, Arendal Sound products were developed with the mindset to recreate the original sonic event, with the highest level of accuracy. This requires a special consideration to balancing several factors: Dynamics, linearity, distortion, power handling, frequency response and Polar characteristics. Stress testing or accelerated life testing is a hallmark of all Arendal Sound designs. Each new design is required to pass a long list of difficult (if not insane) tests.
Lofty goals require custom parts and special attention to details at each step in the path to product realization. Each driver was specially developed from the ground up, requiring much expensive and special tooling. No off-the-shelf drivers were worthy of satisfying all of our goals. Over 2 years in development, following a painstaking progression from theory to reality - each driver is first modeled using advanced FEA (Finite Element Analysis) techniques to meet mechanical, electromagnetic and acoustic goals.
Higher density and naturally better damped than MDF (Medium Density Fiberboard), using HDF (High Density Fiberboard) results in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that may cause audible colorations.
We are especially proud of our new exclusive and fully custom made grills. For all Arendal Sound speakers we have made a free flowing, perforated metal grill which does not affect sound quality. We have then wrapped it with a clean black cloth to tone down the visually hard look, whilst simultaneously damping out any residual vibrations.
We use no plastic parts.
The heart of all Arendal speakers, our Tweeter utilizes a 28mm synthetic soft dome with custom designed, matching waveguide. The soft dome itself is sourced from the high end stable of Dr. Kurt Mueller. It is very light weight, totally pistonic to ultra high frequencies, optimally damped, produced to exceedingly tight tolerances and specifically chosen for its sweet sound character and consistent frequency response. The role of the waveguide is to take an already excellent tweeter and provide refinements to the tweeter’s performance.
The two (2) 8” woofers in the Monitor are built upon the same core fundamentals as the the 13.8” subwoofer, but with application specific details changed. The 8” cone does not have the glass fibre reinforcement of the 13.8” as it is already stiff enough and the base material’s inherent self-damping with its proprietary cone treatment is chief quality. An entirely bespoke design, the 8” mid-woofers are optimised to cover a very wide frequency range from 1500Hz, down to the lowest bass notes without a hint of cone resonance.
Not to be forgotten, the connection point of each speaker offers potential pitfalls for installation woes and signal degradations. Each binding post is made from copper (not brass or other lower conductivity metals), then CNC machined into shape. After the machining process is completed, each component is polished to insure burr free, smooth function and clean cosmetics. The final step is Rhodium plating. Chosen for its excellent conductivity, corrosion resistance and hardness; all serve to protect the copper material and music signal carried within.
All Arendal speakers start with an optimal, low Q sealed box designs. Low frequency performance is accurately damped delivering a tight impulse response - the time the driver takes to stop moving after the signal has passed is very short - and rolls off at the natural sealed box rate of 12dB/octave below the combined box and driver resonant frequency. The Monitor enclosures offer the ability to alternatively be used in a vented alignment. By removing the foam plugs inside the ports, low frequency -3dB point can be extended and given different bass characteristics.
Crossover design is a culmination of model, measure, listen, remodel, remeasure, re-listen, all the while refining performance in increasingly small steps. This is the single most time consuming task in loudspeaker design, as it is the glue without which, even the best components can be made to sound disjointed and poor. As with the overall design goals for all Arendal Sound products, the crossover must be up to the task to deliver on the promise of hi-fidelity and robust construction, without compromise. All models within the Arendal Sound family share common drive units and this applies equally to the treble to mid-bass crossover designs across the range.
You want data? Frequency, impedance and polar response charts.
Luckily for you and for us, Arendal Sound products are extremely durable products which have gone through extreme stress tests during development. However failures may happen and if it does, you will always know we are backup you up. Arendal Sound have up to 10 Years warranty (5 for electronics) which cover all costs for you as a customer within the warranty terms.
|2 x 13.8"||2 x 13.8"|
|Enclosure||High Density Fiberboard (HDF)||
High Density Fiberboard (HDF)
|High Density Fiberboard (HDF)||High Density Fiberboard (HDF)|
|Amplifier||Avalanche 500DSP - 500W RMS||
Avalanche 500DSP - 500W RMS
Avalanche 1000DSP - 1000W RMS
Avalanche 1000DSP - 1000W RMS
Sealed / vented
|Sealed||Sealed / vented|
49.2H x 33.5W x 45D cm
|63.7H x 45W x 55D cm||54.2H x 42W x 50D cm||71.2H x 50W x 60.9D cm|
|Weight||24.5 kg||48.1 kg||41.4 kg||60.1 kg|